Notizia

In-depth Understanding Of Torque Sensors – Structure And Principle Determine Maintenance Direction

Oct 31, 2026 Lasciate un messaggio

To develop an effective maintenance strategy, a thorough understanding of the internal structure and working principle of torque sensors is essential. Only by knowing not only what it does but also why it works can maintenance be targeted and the potential risks of blind operation avoided. Torque sensors come in many types, but their core function remains the same: sensing the torsional torque on a shaft and converting it into a standard electrical signal output.

 

Currently, the most widely used types in industry include strain gauge type, magnetoelastic type, phase difference type (magnetostrictive), and optical type, among which strain gauge type dominates due to its mature technology, high cost-effectiveness, and wide applicability. We will focus on strain gauge torque sensors while also considering other types, analyzing the specific requirements of their structural characteristics for maintenance.

 

The core of a strain gauge torque sensor lies in the combination of an elastic body and a strain gauge. The elastic body is usually made of high-strength alloy steel or stainless steel, precision machined and heat-treated, possessing excellent elastic properties and fatigue resistance. A resistance strain gauge is bonded to specific locations on the elastic body (usually stress concentration areas) using a special bonding process. When torque is applied to the sensor shaft, the elastomer undergoes minute torsional deformation, causing the strain gauges bonded to its surface to stretch or compress, resulting in a change in resistance.

 

These strain gauges typically form a Wheatstone bridge circuit, converting the minute resistance change into a millivolt-level voltage signal output. This process, seemingly simple, actually places extremely high demands on the integrity of the mechanical structure, the stability of the adhesive, and the balance of the circuit. Any minor mechanical damage, adhesive aging, or moisture in the circuit can disrupt the bridge balance, leading to zero-point drift, decreased sensitivity, or even signal distortion.

 

In addition to the core sensing unit, modern torque sensors also integrate signal conditioning circuitry, a temperature compensation network, overload protection devices, and a sealed housing structure. The signal conditioning circuitry amplifies, filters, and converts the weak bridge signal into a standard analog (e.g., 0-10V, 4-20mA) or digital (e.g., RS485, CANopen, EtherCAT) output. The temperature compensation network compensates for the effects of ambient temperature variations on the strain gauge resistance and elastomer modulus, ensuring consistent measurements under different temperature conditions. Overload protection devices (such as mechanical limit blocks) are designed to prevent accidental overload from causing plastic deformation or fracture of the elastomer. The housing seal structure bears the heavy responsibility of dustproofing, waterproofing, and oil protection; its IP rating directly determines the sensor's survivability in harsh environments.

 

While the principles of magnetoelastic or phase difference sensors differ, their maintenance logic is similar. These sensors utilize the property that the permeability of ferromagnetic materials changes under force, or measure torque by detecting a small phase difference between the input and output shafts. They typically do not require slip rings or contact current collectors, achieving non-contact signal transmission, thus possessing inherent advantages in wear resistance and maintenance-free operation.

However, this does not mean they can completely ignore maintenance. The stability of the magnetic circuit, the insulation performance of the coil, the cleanliness of the air gap, and the heat dissipation of the electronic unit are also key factors affecting their long-term reliability. Optical sensors rely on the deformation of gratings or optical fibers to sense torque, and are extremely sensitive to dust, oil, and optical path alignment; therefore, cleaning and protection are particularly important.

Invia la tua richiesta